logo

Cluster Activity

Spots per uW band today:
UK spotter or spotted only.

Solar data:
SFI
178
A-Index
7
K-Index
1
Exp.K
3
Sunspots
103
Activity
eru
GMF
qui
Aurora?
no

My Weather

ArrayDate:07/12/24 Time:12:04
Temp:7C
Wind Speed:15mph
Wind Dir:270deg
Pressure:987.29mB
Humidity:118%
Dew Point:10.6C

This is all there is to the dish and just some 12.5mm wire mesh for the reflector.

The Ribs are 15mm square tube.

I made a template up in wood first then formed them to shape by hand. I used a large mallet, holding the rib between two large wooden blocks and slowly formed the required shape. Surely someone else can come up with an easier method!

Centre



Ribs



First test on the mast for DX ATV!




Initial mount and testing photos using a helical feed:

First dish tests on EME



Mount 1



Mount 2







Here is an Excel sheet i made for calculating the shape of the dish ribs, i used it to create a template in wood when forming the rib shape with a hammer. It may not be 100% correct so watch out but seemed to work ok for me!!

Dish Shape Calculator
















Last page added:25/03/00 18:32
M0DTS.co.uk