logo

Transfer%20Relay%2024v%20to%2012v



    Cluster Activity

    Spots per uW band today:
    UK spotter or spotted only.

    Solar data:
    SFI
    175
    A-Index
    6
    K-Index
    2
    Exp.K
    0
    Sunspots
    114
    Activity
    act
    GMF
    qui
    Aurora?
    no

    My Weather

    ArrayDate:28/03/24 Time:14:31
    Temp:11C
    Wind Speed:12.5mph
    Wind Dir:157deg
    Pressure:975.33mB
    Humidity:57%
    Dew Point:2.4C
    UKHASnet

    The latest source of Transfer Relays on ebay are also easily modified for use at 12v instead of 24v.

    *** Information Corrected 13/5/2017

    Ace Technology
    Model : GW21-A1
    P/N : RF402629

    This is basically the same as the other relays, as standard the coils are in series, we change them to parallel.

    Here's the Relay:

    Relay PartNo


    Relay Conns



    To modify for 12v operation there are 3 steps.
    1: Cut the track between white wires on both white connectors on top pcb.
    2: Solder wire links under these headers to parallel the coils.
    3: Swap three wires (blue,brown and white) wiring in the white plugs.

    Before Track Cut


    After Track Cut



    Wire links added



    Modified Wiring



    Changes to the plug wiring:
    The Right white wire position is not altered.
    The plug leading to the coils nearest J1 can be left disconnected if you do not require the 'transfer' facility, this saves power if you are just using it for a 2-pole switch.
    Wiring Changes



    Example use at mast head













    Last page added:25/03/00 18:32
    M0DTS.co.uk